Éra Clean Réverto
Éra Clean Reverto is a non-corrosive rust converter effective on ferrous metals such as carbon steel, mild steel, cast iron, wrought iron, structural steel, and iron. Its viscosity allows for easy application on both vertical and horizontal surfaces. The selected acids trigger a reaction that transforms active rust into stable compounds that strongly adhere to the metal surface, creating a new layer resistant to oxidation.
For greenhouse environment
Pour les surfaces inanimées. Éliminer les éclats de rouille superficielle. Sabler légèrement la surface avec un grain 80–120, puis150–180. Rincer pour éliminer la poudre de rouille. Appliquer une couche généreuse de Éra Clean Reverto sur la surface à l’aide d’un pinceau ou d’un rouleau. Laisser sécher 12 à 24 heures. Traiter la surface avec un apprêt. Rincer à l’eau.
Main Advantages:
Converts rust into stable compounds.
Requires only light surface sanding.
Converted surface can be primed (paint, oil, or other coatings).
Can be applied without special equipment.
Non-corrosive to adjacent metals and safe for the user.
Mode of action:
- Era Clean Réverto is formulated with different acids to chemically and irreversibly transform rust into a surface resistant to oxidation.
Safety data sheet
For optimal and safe use of our Éra Clean Réverto product, please refer to the SDS product’s.
User Manual
Equipment: Sandpaper 80-120 then 150-180, then a paintbrush or roller.
Lightly sand the surface with 80–120 grit, then 150–180. Rinse. Apply a generous coat of Éra Clean Reverto to the surface. Let dry for 12 to 24 hours. Treat the surface with a primer. Rinse with water.
Note: The surface color will darken. Apply a second coat if a rust tint persists.
Application table
 Type of culture |
Application rate |
 Frequency |
|---|---|---|
|
Rust surfaces
|
|
|